Carregant...
Carregant...

Vés al contingut (premeu Retorn)

Ethanol catalytic membrane reformer for direct PEM FC feeding

Autor
Koch, R.; Lopez, E.; Riera, J.; Allué, M.; Jossen, A.; J. Divins, N.; Llorca, J.
Tipus d'activitat
Article en revista
Revista
International journal of hydrogen energy
Data de publicació
2013
Volum
38
Número
14
Pàgina inicial
5605
Pàgina final
5615
DOI
https://doi.org/10.1016/j.ijhydene.2013.02.107 Obrir en finestra nova
Repositori
http://hdl.handle.net/2117/19469 Obrir en finestra nova
URL
http://dx.doi.org/10.1016/j.ijhydene.2013.02.107 Obrir en finestra nova
Resum
In this paper an ethanol reformer based on catalytic steam reforming with a catalytic honeycomb loaded with RhPd/CeO2 and palladium separation membranes with an area of 30.4 cm2 has been used to generate a pure hydrogen stream of up to 100 ml/min to feed a PEM fuel cell with an active area of 5 cm2. The fuel reformer behavior has been extensively studied under different temperature, ethanol–water flow rate and gas pressure at a fixed S/C ratio of 1.6 (molar). The hydrogen yield has been contro...
Citació
Koch, R. [et al.]. Ethanol catalytic membrane reformer for direct PEM FC feeding. "International journal of hydrogen energy", 2013, vol. 38, núm. 14, p. 5605-5615.
Paraules clau
Dynamic modeling, Ethanol steam reforming, Metal membrane, PEM fuel cell, Reformer control, Sensitivity analysis
Grup de recerca
ACES - Control Avançat de Sistemes d´Energia
CRnE - Centre de Recerca en Ciència i Enginyeria Multiescala de Barcelona
NEMEN - Nanoenginyeria de materials aplicats a l'energia

Participants