Carregant...
Carregant...

Vés al contingut (premeu Retorn)

Detailed mechanical design of the LIPAc beam dump radiological shielding

Autor
Nomen, O.; Mollá, J.; Sanmartí, M.; Martínez, J.I.; Arranz , F.; Iglesias, D.; Barrera, G.; Brañas, B.; Ogando, F.
Tipus d'activitat
Article en revista
Revista
Fusion engineering and design
Data de publicació
2013-10-02
Volum
88
Número
9-10
Pàgina inicial
2723
Pàgina final
2727
DOI
https://doi.org/10.1016/j.fusengdes.2013.01.105 Obrir en finestra nova
Repositori
http://hdl.handle.net/2117/20257 Obrir en finestra nova
URL
http://www.sciencedirect.com/science/article/pii/S0920379613001555 Obrir en finestra nova
Resum
The LIPAc is a 9 MeV, D+ linear prototype accelerator for the validation of the IFMIF accelerator design. The high intensity, 125 mA CW beam is stopped in a copper cone involving a high production of neutrons and gamma radiation and activation of its surface. The beam stopper is surrounded by a shielding to attenuate the resulting radiation so that dose rate values comply with the limits at the different zones of the installation. The shielding includes for that purpose polyethylene rings, wate...
Citació
Nomen, O. [et al.]. Detailed mechanical design of the LIPAc beam dump radiological shielding. "Fusion engineering and design", 02 Octubre 2013, vol. 88, núm. 9-10, p. 2723-2727.
Paraules clau
Ifmif, Lipac, Linear Accelerator, Mechanical Design

Participants

  • Nomen Escoda, Oriol  (autor)
  • Mollá Lorente, Joaquin  (autor)
  • Sanmartí Cardona, Manel  (autor)
  • Martínez, José I.  (autor)
  • Arranz, Fernando  (autor)
  • Iglesias, Daniel  (autor)
  • Barrera, German  (autor)
  • Brañas, Beatriz  (autor)
  • Ogando, Francisco  (autor)