Carregant...
Carregant...

Vés al contingut (premeu Retorn)

Analysis of the misfit of dental implant-supported prostheses made with three manufacturing processes

Autor
Fernandez, M.; Delgado, L.; Molmeneu, M.; García, D.; Rodriguez, D.
Tipus d'activitat
Article en revista
Revista
Journal of prosthetic dentistry
Data de publicació
2014-02-01
Volum
111
Número
2
Pàgina inicial
116
Pàgina final
123
DOI
https://doi.org/10.1016/j.prosdent.2013.09.006 Obrir en finestra nova
Repositori
http://hdl.handle.net/2117/21368 Obrir en finestra nova
URL
http://www.sciencedirect.com/science/article/pii/S0022391313002072# Obrir en finestra nova
Resum
Statement of problem. The microgap between implant components has been associated with complications such as screw loosening or adverse biologic responses. Purpose. The purpose of this study was to quantify the microroughness of the mating surfaces of implant components manufactured with different processes, to quantify the microgap between implant components, and to determine whether a correlation exists between microroughness and the microgap. Clinical Implications: The microgap of implant-abu...
Citació
Fernandez, M. [et al.]. Analysis of the misfit of dental implant-supported prostheses made with three manufacturing processes. "Journal of prosthetic dentistry", 01 Febrer 2014, vol. 111, núm. 2, p. 116-123.
Paraules clau
Dental Implants, Manufacturing, Misfit, Titanium
Grup de recerca
BBT - Biomaterials, Biomecànica i Enginyeria de Teixits
CRnE - Centre de Recerca en Ciència i Enginyeria Multiescala de Barcelona

Participants