Carregant...
Carregant...

Vés al contingut (premeu Retorn)

Determination of the mechanical properties of radiata pine timber by means of longitudinal and transverse vibration method

Autor
Monton, J.; Segues, E.; Arriaga, F.; Íñiguez-González, G.
Tipus d'activitat
Article en revista
Revista
Holzforschung
Data de publicació
2014
Volum
68
Número
3
Pàgina inicial
299
Pàgina final
305
DOI
10.1515/hf-2013-0087
Resum
Bending properties have been determined by mechanical testing [modulus of elasticity (MOE) and modulus of rupture (MOR)] and by means of longitudinal (L) and transverse (T) vibration nondestructive methods on 150 sawn timber pieces of Pinus radiata D. Don, with the dimensions of 80×120 mm cross-section and 2500 mm long, from Catalonia, Spain. The fundamental vibration frequency was measured by recording the sound produced by hitting the piece in L and T directions, and this signal was analyzed ...
Paraules clau
mechanical properties, nondestructive testing, ongitudinal vibration, sawn timber, transverse vibration
Grup de recerca
GICITED - Grup Interdiciplinari de Ciència i Tecnologia en l'Edificació

Participants