Carregant...
Carregant...

Vés al contingut (premeu Retorn)

Influence of pre-existing martensite on the wear resistance of metastable austenitic stainless steels

Autor
Fargas, G.; Roa, J.J.; Mateo, A.
Tipus d'activitat
Article en revista
Revista
Wear
Data de publicació
2016
Número
364-365
Pàgina inicial
40
Pàgina final
47
DOI
https://doi.org/10.1016/j.wear.2016.06.018 Obrir en finestra nova
Repositori
http://hdl.handle.net/2117/101244 Obrir en finestra nova
URL
http://www.sciencedirect.com/science/article/pii/S0043164816301326 Obrir en finestra nova
Resum
The effect of pre-existing martensite on the sliding wear behavior of a commercial metastable austenitic stainless steel was investigated. Two different steel conditions were considered: annealed (with a fully austenitic microstructure) and cold rolled, consisting of mixtures of austenite and martensite. Wear tests were carried out using ball on disc technique at constant velocity and different sliding distances. Correlation between microstructure and wear mechanisms was performed by X-ray diffr...
Citació
Fargas, G., Roa, J.J., Mateo, A. Influence of pre-existing martensite on the wear resistance of metastable austenitic stainless steels. "Wear", 2016, núm. 364-365, p. 40-47.
Paraules clau
Advanced characterization techniques, Martensite, Metastable austenitic stainless steels, Sliding wear
Grup de recerca
CIEFMA - Centre d'Integritat Estructural, Micromecànica i Fiabilitat dels Materials
CRnE - Centre de Recerca en Ciència i Enginyeria Multiescala de Barcelona

Participants

Arxius