Carregant...
Carregant...

Vés al contingut (premeu Retorn)

Influence of cold work in the elastic modulus of the Ti-16.2Hf-24.8Nb-1Zr alloy characterized by instrumented nanoindentation

Autor
González, M.; Peña, F.; Manero, J.; Gil, F.J.
Tipus d'activitat
Article en revista
Revista
Key engineering materials
Data de publicació
2010
Volum
423
Pàgina inicial
113
Pàgina final
118
DOI
https://doi.org/10.4028/www.scientific.net/KEM.423.113 Obrir en finestra nova
Repositori
http://hdl.handle.net/2117/6605 Obrir en finestra nova
Resum
Nowadays, β type Ti-based alloys have been developed for load transfer clinical applications due to their superelasticity, shape memory effect, low elastic modulus and high damping capacity [1]. These properties promote bone regeneration and make them promising candidates for being used in load transfer implantology. The objective of the present work is to achieve a material with shape memory properties and/or low elastic modulus. The influence of cold work on the thermoelastic martensitic tran...
Citació
González, M. [et al.]. Influence of cold work in the elastic modulus of the Ti-16.2Hf-24.8Nb-1Zr alloy characterized by instrumented nanoindentation. "Key engineering materials", 2010, vol. 423, p. 113-118.
Grup de recerca
BBT - Biomaterials, Biomecànica i Enginyeria de Teixits
CREB - Centre de Recerca en Enginyeria Biomedica
CRnE - Centre de Recerca en Ciència i Enginyeria Multiescala de Barcelona

Participants