Carregant...
Carregant...

Vés al contingut (premeu Retorn)

Poly(lactic acid) and acrylonitrile-butadiene-styrene blends: influence of adding ABS-g-MAH compatibilizer on the kinetics of the thermal degradation

Autor
Carrasco, F.; Santana, O.; Cailloux, J.; Sanchez-Soto, M.; Maspoch, M.
Tipus d'activitat
Article en revista
Revista
Polymer testing
Data de publicació
2018-05
Volum
67
Pàgina inicial
468
Pàgina final
476
DOI
https://doi.org/10.1016/j.polymertesting.2018.03.010 Obrir en finestra nova
Repositori
http://hdl.handle.net/2117/115985 Obrir en finestra nova
Resum
Square plates (nominal thickness: 3 mm, nominal width: 100 mm) of different rheologically modified PLA/ABS blends were manufactured through injection molding, with or without adding ABS grafted with maleic anhydride (MAH). During processing, the properties of the melt were stabilized and enhanced by the addition of a styrene-acrylic multi-functional-epoxide oligomeric reactive agent (SAmfE). PLA-REX was obtained by reactive extrusion of PLA. A general analytical equation was used in order to...
Citació
Carrasco, F., Santana, O., Cailloux, J., Sanchez-Soto, M., Maspoch, M. Poly(lactic acid) and acrylonitrile-butadiene-styrene blends: influence of adding ABS-g-MAH compatibilizer on the kinetics of the thermal degradation. "Polymer testing", Maig 2018, vol. 67, p. 468-476.
Grup de recerca
e-PLASCOM - Plàstics i Compòsits Ecològics

Participants

Arxius