Carregant...
Carregant...

Vés al contingut (premeu Retorn)

Journal of applied polymer science

Total activitats: 115
ISSN
0021-8995 Obrir en finestra nova
Publicació / Producció
New York : Interscience Publishers ; London S.W.1, 1959
Editorial
Wiley

Producció científica

1 a 50 de 115 resultats
 
  • Sonochemical synthesis and stabilization of concentrated antimicrobial silver-chitosan nanoparticle dispersions

     Francesko, A.; Petkova, P.; Mendoza, E.; Tzanov, T.
    Journal of applied polymer science
    Vol. 134, num. 30, p. 1-8
    DOI: 10.1002/APP.45136
    Data de publicació: 2017-08
    Article en revista
  • PLA/SiO2 composites: influence of the filler modifications on the morphology, crystallization behaviour and mechanical properties

     Bin, R.; Cailloux, J.; Santana, O.; Bou, J. J.; Sanchez-Soto, M.; Odent, J.; Raquez, J.; Dubois, P.; Carrasco, F.; Maspoch, M.
    Journal of applied polymer science
    Vol. 134, p. 45367-45379
    Data de publicació: 2017-06-14
    Article en revista
  • Incorporation of chloramphenicol and captopril into poly(GL)-b-poly(GL-co-TMC-co-CL)-b-poly(GL) monofilar surgical sutures

     Márquez, Y.; Cabral, T.; Lorenzetti, A.; Franco, M.; Turon, P.; del Valle, LJ.; Puiggali, J.
    Journal of applied polymer science
    Vol. 134, num. 44762
    DOI: 10.1002/app.44762
    Data de publicació: 2017-05-05
    Article en revista
  • Biodegradable nanofibrous scaffolds as smart delivery vehicles for amino acids

     Maione, S.; Pérez-Madrigal, M.M.; del Valle, LJ.; Diaz, A.; Catiavela, C.; Franco, M.; Puiggali, J.; Aleman, C.
    Journal of applied polymer science
    Vol. 134, num. 22
    DOI: 10.1002/app.44883
    Data de publicació: 2017
    Article en revista
  • Influence of the notch-sharpening technique on styrene-acrylonitrile fracture behavior

     Martinez, A.; Salazar, A.; León, N.; Illescas, S.; Rodríguez, J.
    Journal of applied polymer science
    Vol. 133, num. 32
    DOI: 10.1002/app.43775
    Data de publicació: 2016-08-20
    Article en revista
  • Synthesis of poly(ester amide)s composed of lactic acid and glycolic acid units by the bulk polycondensation of metal halide salts

     Murase, S. K.; Puiggali, J.
    Journal of applied polymer science
    Vol. 133, num. 12
    DOI: 10.1002/app.43197
    Data de publicació: 2016-03-20
    Article en revista
  • Multifunctional ternary drug-loaded electrospun scaffolds  Accés obert

     Llorens, E.; del Valle, LJ.; Puiggali, J.
    Journal of applied polymer science
    Vol. 133, p. 1-16
    DOI: 10.1002/app.42751
    Data de publicació: 2016-02-20
    Article en revista
    Accés al text complet
  • Effect of microcellular foaming on the fracture behavior of ABS polymer  Accés obert

     Gómez-Monterde, J.; Schulte, M.; Ilijevic, S.; Hain, J.; Sanchez-Soto, M.; Santana, O.; Maspoch, M.
    Journal of applied polymer science
    Vol. 133, num. 7, p. 43010-1-43010-10
    DOI: 10.1002/APP.43010
    Data de publicació: 2016-02-15
    Article en revista
    Accés al text complet
  • Electrospinning of gelatin fibers using solutions with low acetic acid concentration: effect of solvent composition on both diameter of electrospun fibers and cytotoxicity  Accés obert

     Erencia, M.; Cano, F.; Tornero, J.; Macedo, M.M.; Tzanov, T.; Macanás, J.; Carrillo, F.
    Journal of applied polymer science
    Vol. 132, num. 25, p. 42115 (1/11)-42115 (11(11)
    DOI: 10.1002/app.42115
    Data de publicació: 2015-03-13
    Article en revista
    Accés al text complet
  • Synthesis and characterization of poly(ester amides)s with a variable ratio of branched odd diamide units

     Murase, S. K.; Puiggali, J.; del Valle, LJ.; Franco, M.
    Journal of applied polymer science
    Vol. 131, num. 7, p. 1-13
    DOI: 10.1002/app.40102
    Data de publicació: 2014-04-05
    Article en revista
  • Photocuring of cycloaliphatic epoxy formulations using polyesters with multiarm star topology as additives

     Flores, Marjorie; Fernandez-Francos, X.; Ramis, X.; Sangermano, M.; Ferrando, F.; Serra, À.
    Journal of applied polymer science
    Vol. 131, num. 6, p. 1-9
    DOI: 10.1002/app.40005
    Data de publicació: 2014-03-15
    Article en revista
  • Highly exfoliated nanostructure in trifunctional epoxy/clay nanocomposites using boron trifluoride as initiator

     Hutchinson, J.M.; Shiravand, F.; Calventus, Y.; Fernandez-Francos, X.; Ramis, X.
    Journal of applied polymer science
    Vol. 131, num. 6, p. 40020-
    DOI: 10.1002/app.40020
    Data de publicació: 2014-03-15
    Article en revista
  • Sulfonated poly(hexamethylene terephthalate) copolyesters: enhanced thermal and mechanical properties

     Bautista, M.I.; Martinez de Ilarduya, A.; Alla, A.; Muñoz, S.
    Journal of applied polymer science
    Vol. 129, num. 6, p. 3527-3535
    DOI: 10.1002/APP.39108
    Data de publicació: 2013-09-15
    Article en revista
  • Modification of epoxy–anhydride thermosets with a hyperbranched poly(ester amide). II. Thermal, dynamic mechanical, and dielectric properties and thermal reworkability

     Fernandez-Francos, X.; Rybak, A.; Sekula, E.; Ramis, X.; Ferrando, F.; Okrasa, L.; Serra, À.
    Journal of applied polymer science
    Vol. 128, num. 6, p. 4001-4013
    DOI: 10.1002/app.38453
    Data de publicació: 2013-06
    Article en revista
  • Effect of the unidirectional drawing on the thermal and mechanical properties of PLA films with different L -isomer content

     Velázquez-Infante, J.C.; Gámez-Pérez, J.; E Franco-Urquiza; Santana, O.; Carrasco, F.; Maspoch, M.
    Journal of applied polymer science
    Vol. 127, num. 4, p. 2661-2669
    DOI: 10.1002/app.37546
    Data de publicació: 2013-02-15
    Article en revista
  • Copolymerization of potassium chloroacetate and potassium N-chloroacetyl-6-aminohexanoate

     Murase, S. K.; Franco, M.; Rodriguez, R.; Puiggali, J.
    Journal of applied polymer science
    Vol. 126, num. 4, p. 1425-1436
    DOI: 10.1002/app.36708
    Data de publicació: 2012-11-15
    Article en revista
  • Cyclodextrin functionalization of several cellulosic substrates for prolonged release of antibacterial agents

     Cusola, O.; Tabary, N.; Naceur, M.; Bras, J.
    Journal of applied polymer science
    Vol. 129, num. 2, p. 604-613
    DOI: 10.1002/APP.38748
    Data de publicació: 2012-11-13
    Article en revista
  • Films of native and modified starch reinforced with fiber: influence of some extrusion variabels using response surface methodology

     Galicia-García, T.; Martínez-Bustos, F.; Jiménez-Arevalo, O.; Arencon, D.; Gámez-Pérez, J.; Martinez, A.
    Journal of applied polymer science
    Vol. 126, num. S1, p. E326-E335
    DOI: 10.1002/app.36982
    Data de publicació: 2012-10-25
    Article en revista
  • Intra- and extra-gallery reactions in tri-functional epoxy polymer layered silicate nanocomposites

     Hutchinson, J.M.; Shiravand, F.; Calventus, Y.
    Journal of applied polymer science
    Vol. 128, num. 5, p. 2961-2970
    DOI: 10.1002/app.38452
    Data de publicació: 2012-09-05
    Article en revista
  • Curing and characterization of oxazolidone-isocyanurate-ether networks

     Flores, M.; Fernandez-Francos, X.; Morancho, J.; Serra, À.; Ramis, X.
    Journal of applied polymer science
    Vol. 125, num. 4, p. 2779-2789
    DOI: 10.1002/app.35504
    Data de publicació: 2012-08-15
    Article en revista
  • Optical expandometry: a technique to analyze the expansion kinetics of chemically blown thermoplastic foams

     Solórzano, E.; De Sousa Pais, M.; Saiz-Arroyo, C.; Velasco J.I.; Rodríguez-Pérez , M.; de Saja, J.
    Journal of applied polymer science
    Vol. 125, num. 2, p. 1059-1067
    DOI: 10.1002/app.34306
    Data de publicació: 2012-07
    Article en revista
  • Thermal Analysis of Enhanced Poly (vinyl alcohol)-Based Proton-Conducting Membranes Crosslinked with Sulfonation Agents for direct Methanol Fuel Cells

     Morancho, J.; Salla, J.; Cadenato, A.; Fernandez-Francos, X.; Colomer, P.; Calventus, Y.; Ramis, X.; Ruiz Mansilla, Rafael
    Journal of applied polymer science
    Vol. 124, num. SI, p. E57-E65
    DOI: 10.1002/app.35500
    Data de publicació: 2012-06-25
    Article en revista
  • Low energy impact indentation of a modified polyethylene terephthalate by instrumented falling weight

     Martinez, A.; Arencon, D.; Navas, J.; Velasco J.I.
    Journal of applied polymer science
    Vol. 127, num. 4, p. 2983-2989
    DOI: 10.1002/APP.37969
    Data de publicació: 2012-04-27
    Article en revista
  • Carbohydrate-based polyurethanes: A comparative study of polymers made from isosorbide and 1,4-butanediol

     Marin, R.; Alla, A.; Martinez de Ilarduya, A.; Muñoz, S.
    Journal of applied polymer science
    Vol. 123, num. 2, p. 986-994
    DOI: 10.1002/app.34545
    Data de publicació: 2012-01-15
    Article en revista
  • Preparation and release study of ibuprofen-loaded porous matrices of a biodegradable poly(ester amide) derived from L -alanine units

     del Valle, LJ.; Roca, D.; Franco, M.; Puiggali, J.; Rodriguez, R.
    Journal of applied polymer science
    Vol. 122, num. 3, p. 1953-1967
    DOI: 10.1002/app.34017
    Data de publicació: 2011-11
    Article en revista
  • Different properties for poly(3,4-ethylenedioxythiophene) films derived from single or multiple polymerization steps

     Aradilla, D.; Estrany, F.; Aleman, C.
    Journal of applied polymer science
    Vol. 121, num. 4, p. 1982-1991
    DOI: 10.1002/app.33758
    Data de publicació: 2011-08-15
    Article en revista
  • Influence of crystallinity on the fracture toughness of poly(lactic acid)/montmorillonite nanocomposites prepared by twin-screw extrusion

     Gamez, J.; Nascimento, L.; Bou, J. J.; E Franco-Urquiza; Santana, O.; Carrasco, F.; Maspoch, M.
    Journal of applied polymer science
    Vol. 120, num. 2, p. 896-905
    DOI: 10.1002/app.33191
    Data de publicació: 2011-04-15
    Article en revista
  • Nonisothermal crystallization behavior of a biodegradable segmented copolymer constituted by glycolide and trimethylene carbonate units

     Díaz, E.; Franco, M.; Puiggali, J.
    Journal of applied polymer science
    Vol. 119, num. 3, p. 1548-1559
    DOI: 10.1002/app.32816
    Data de publicació: 2011-02-05
    Article en revista
  • The effect of anionic clay particles on the structure and thermomechanical behavior of sodium partially-neutralized EMAA ionomer  Accés obert

     Ardanuy, M.; Velasco J.I.; Rodríguez-Pérez , M.; de Saja, J.
    Journal of applied polymer science
    Vol. 116, num. 5, p. 2573-2579
    DOI: 10.1002/app.31818
    Data de publicació: 2010-06-20
    Article en revista
    Accés al text complet
  • Crystallization Studies on Linear Aliphatic Polyamides Derived From Naturally Occurring Carbohydrates

     Fernandez, C.E.; Bermudez, M.; Alla, A.; Mancera, M.; Garcia- Martin, M.; Benito, E.; Roffe, I.; Galbis, J.; Muñoz, S.
    Journal of applied polymer science
    Vol. 116, num. 5, p. 2515-2525
    DOI: 10.1002/app.31759
    Data de publicació: 2010-06-05
    Article en revista
  • Isothermal crystallization study on a biodegradable segmented copolymer constituted by glycolide and trimethylene carbonate units

     Diaz, E.; Franco, M.; Puiggali, J.
    Journal of applied polymer science
    Vol. 116, num. 1, p. 577-589
    DOI: 10.1002/app.31554
    Data de publicació: 2010-04-05
    Article en revista
  • Poly(ethylene terephthalate-co-isophthalate) copolyesters obtained from ethylene terephthalate and isophthalate oligomers  Accés obert

     Ubach, J.; Martinez de Ilarduya, A.; Quintana, R.; Alla, A.; Rudé, E.; Muñoz, S.
    Journal of applied polymer science
    Vol. 115, num. 3, p. 1823-1830
    DOI: 10.1002/app.31308
    Data de publicació: 2010-02-05
    Article en revista
    Accés al text complet
  • Influence of corona discharge and chitosan surface treatment on dyeing properties of wool

     Ristic, N.; Jovancic, P.; Canal, C.; Jocic, D.
    Journal of applied polymer science
    Vol. 117, p. 2487-2496
    DOI: 10.1002/app.32127
    Data de publicació: 2010
    Article en revista
  • Carbohydrate-Based Poly(ester-urethane)s: A Comparative Study Regarding Cyclic Alditols Extenders and Polymerization Procedures

     Marin, R.; Muñoz, S.
    Journal of applied polymer science
    Vol. 114, num. 6, p. 3723-3736
    DOI: 10.1002/app.30924
    Data de publicació: 2009-12
    Article en revista
  • Incorporation of triclosan into polydioxanone monofilaments and evaluation of the corresponding release

     Blanco, M.; Franco, M.; Puiggali, J.; Rodriguez, R.
    Journal of applied polymer science
    Vol. 114, num. 6, p. 3440-3451
    DOI: 10.1002/app.30651
    Data de publicació: 2009-12
    Article en revista
  • Study of the influence of IPPD on thermo-oxidation process of elastomeric hose

     Colom, X.; Andreu, F.; Cañavate, J.; Mujal, R.; Carrillo, F.
    Journal of applied polymer science
    Vol. 114, num. 4, p. 2011-2018
    DOI: 10.1002/app.30746
    Data de publicació: 2009-11
    Article en revista
  • Homopolymerization Effects in Polymer Layered Silicate Nanocomposites Based Upon Epoxy Resin: Implications for Exfoliation

     Pustkova, P.; Hutchinson, J.M.; Roman, F.; Montserrat, S.
    Journal of applied polymer science
    Vol. 114, num. 2, p. 1040-1047
    DOI: 10.1002/app.30697
    Data de publicació: 2009-10
    Article en revista
  • Influence of EMAA Compatibilizer on the Structure and Properties of HDPE/Hydrotalcite Nanocomposites Prepared by Melt Mixing

     Ardanuy, M.; Velasco J.I.; Maspoch, M.; Haurie, L.; Fernandez, A.
    Journal of applied polymer science
    Vol. 113, num. 2, p. 950-958
    DOI: 10.1002/app.30133
    Data de publicació: 2009-07
    Article en revista
  • A New Strategy for Controlling Shrinkage of DGEBA Resins Cured by Cationic Copolymerization with Hydroxyl-Terminated Hyperbranched Polymers and Ytterbium Triflate as an Initiator

     Fernandez-Francos, X.; Salla, J.; Cadenato, A.; Morancho, J.; Serra, À.; Mantecón, A.; Ramis, X.
    Journal of applied polymer science
    Vol. 111, num. 6, p. 2822-2829
    Data de publicació: 2009-03
    Article en revista
  • Effect of a Dodecylsulfate-Modified Magnesium-Aluminum Layered Double Hydroxide on the Morphology and Fracture of Polystyrene and Poly(styrene-co-acrylonitrile) Composites

     De Redondo, V.; De Sousa Pais, M.; Arencon, D.; Fernandez, A.; Velasco J.I.
    Journal of applied polymer science
    Vol. 111, num. 5, p. 2574-2583
    DOI: 10.1002/app.29288
    Data de publicació: 2009-03
    Article en revista
  • Effect of the particle size and acid pretreatments on compatibility and properties of recycled HDPE plastic bottles filled with ground tyre powder

     Colom, X.; Cañavate, J.; Carrillo, F.; Suñol, J.
    Journal of applied polymer science
    Vol. 112, num. 4, p. 1882-1890
    DOI: 10.1002/app.29611
    Data de publicació: 2009-02
    Article en revista
  • Anionic Copolymerization of Diglycidyl Ether of Bisphenol A with Meldrum's Acid Derivatives Initiated by 4-(N,N-Dimethylamino) Pyridine

     González, L.; Mantecón, A.; Ramis, X.; Serra, À.; Salla, J.
    Journal of applied polymer science
    Vol. 111, num. 4, p. 1805-1815
    Data de publicació: 2009-02
    Article en revista
  • Microspheres of new alternating copolyesters derived from glycolic acid units for controlled drug release

     Martinez, M.; Franco, M.; Puiggali, J.
    Journal of applied polymer science
    Vol. 110, num. 4, p. 2127-2138
    Data de publicació: 2008-11
    Article en revista
  • Crosslinking of mixtures of DGEBA with 1,6-Dioxaspiro[4,4]nonan-2,7-dione initiated by tertiary amines. I. Study of the reaction and kinetic analysis

     Fernandez-Francos, X.; Salla, J.; Mantecón, A.; Serra, À.; Ramis, X.
    Journal of applied polymer science
    Vol. 109, num. 4, p. 2304-2315
    DOI: 10.1002/app.28312
    Data de publicació: 2008-08
    Article en revista
  • Cationic curing of diglycidyl ether of bisphenol A and 2,2,5,5-tetramethyl-4,6-dioxo-1,3-dioxane and degradation of the thermosets obtained

     González, L.; Ramis, X.; Salla, J.; Mantecón, A.; Serra, À.
    Journal of applied polymer science
    Vol. 108, num. 2, p. 1229-1237
    Data de publicació: 2008-04
    Article en revista
  • Analysis of the cure of epoxy based layered silicate nanocomposites: Reaction kinetics and nanostructure development

     Montserrat, S.; Roman, F.; Hutchinson, J.M.; Campos, J.Lourdes
    Journal of applied polymer science
    Vol. 108, num. 2, p. 923-938
    Data de publicació: 2008-04
    Article en revista
  • Poly(3-alkylthiophene)s as anticorrosive additive for paints: influence of the main chain stereoregularity

     Iribarren, J.; Ocampo, C.; Armelin, E.; Liesa, F.; Aleman, C.
    Journal of applied polymer science
    Vol. 108, num. 5, p. 3291-3297
    DOI: 10.1002/app.27652
    Data de publicació: 2008-03
    Article en revista
  • Effects of extrusion conditions on the properties of recycled poly(ethylene terephthalate)/nanoclay nanocomposites prepared by a twin-screw extruder

     Giraldi, A.; Bizarria, M.; Silva, A.; Velasco J.I.; D'Ávila, M.; Mei, L.
    Journal of applied polymer science
    Vol. 108, num. 4, p. 2252-2259
    Data de publicació: 2008-02
    Article en revista
  • Study of Curing of Layered Silicate/Trifunctional Epoxy Nanocomposites by Means of FTIR Spectroscopy

     Pages, P.; Lacorte, M.; Lipinska, M.; Carrasco, F.
    Journal of applied polymer science
    Vol. 108, p. 2107-2115
    Data de publicació: 2008-02
    Article en revista
  • Synthesis of new functionalized polymers and their use as stabilizers of Pd, Pt, and Rh nanoparticles. Preliminary catalytic studies

     Favier, I.; Gómez, M.; Muller, G.; Picurelli, D.; Nowicki, A.; Roucoux, A.; Bou, J. J.
    Journal of applied polymer science
    Vol. 105, num. 5, p. 2772-2782
    Data de publicació: 2007-09
    Article en revista