Loading...
Loading...

Go to the content (press return)

Influence of humectant quantity and mixing time on the quality of abrasive stones used in honing processes

Author
Buj, I.; Joan Vivancos-Calvet; Corominas, L.
Type of activity
Presentation of work at congresses
Name of edition
16th International Research / Expert Conference "Trends in the development of machinery and associated technology"
Date of publication
2012
Presentation's date
2012-09-10
Book of congress proceedings
16th International Research / Expert Conference "Trends in the development of machinery and associated technology". Proceedings
First page
27
Last page
30
Repository
http://hdl.handle.net/2117/17762 Open in new window
Abstract
In the manufacturing process of abrasive stones with cubic boron nitride (CBN) as abrasive and metallic binder, some differences were observed regarding abrasive density at different heights of the stones. If abrasive density is too low, honing stones do not cut the material properly. Honing stones are obtained by means of sintering processes. Previously, a humectant material is added to abrasive grains, and then they are mixed with metallic binder. Humectant is used to assure covering of each a...
Citation
Buj, I.; Vivancos, J.; Corominas, L. Influence of humectant quantity and mixing time on the quality of abrasive stones used in honing processes. A: International Reseach/Expert Conference. "16th International Research / Expert Conference". Dubai: 2012, p. 27-30.
Group of research
TECNOFAB - Manufacturing Technologies Research Group

Participants