Carregant...
Carregant...

Vés al contingut (premeu Retorn)

Evolution of roughness parameters along polishing tests of previously ground surfaces

Autor
Buj, I.; Joan Vivancos-Calvet
Tipus d'activitat
Presentació treball a congrés
Nom de l'edició
16th International Research / Expert Conference "Trends in the development of machinery and associated technology"
Any de l'edició
2012
Data de presentació
2012-09-10
Llibre d'actes
16th International Research / Expert Conference "Trends in the development of machinery and associated technology". Proceedings
Pàgina inicial
35
Pàgina final
38
Repositori
http://hdl.handle.net/2117/17763 Obrir en finestra nova
Resum
In polishing tests, precise determination of polishing time needed is difficult, since representation of surface roughness against polishing time leads to an asymptotic curve. In the present work, results of the polishing tests of previously ground surfaces are presented. Different roughness parameters were considered. Grinding wheels of 100 and 150 Norton grain size respectively were used. Cutting speed was 25 m s-1 and depth of cut was 0.02 mm. Two different feeds were considered: 9 m min-1 an...
Citació
Buj, I.; Vivancos, J. Evolution of roughness parameters along polishing tests of previously ground surfaces. A: International Reseach/Expert Conference. "16th International Research / Expert Conference". Dubai: 2012, p. 35-38.
Grup de recerca
TECNOFAB - Grup de Recerca en Tecnologies de Fabricació

Participants