Carregant...
Carregant...

Vés al contingut (premeu Retorn)

A procedure to design wide-band electromagnetically-coupled stacked microstrip antennas based on a simple network model

Autor
Anguera, J.; Puente, C.; Borja, C.
Tipus d'activitat
Presentació treball a congrés
Nom de l'edició
1999 IEEE International Symposium on Antennas and Propagation
Any de l'edició
1999
Data de presentació
1999-07
Llibre d'actes
1999 IEEE International Symposium on Antennas and Propagation, vol. 1: proceedings: 11-16 July 1999, Orlando, FL, USA
Pàgina inicial
944
Pàgina final
947
Editor
Institute of Electrical and Electronics Engineers (IEEE)
DOI
https://doi.org/10.1109/APS.1999.789468 Obrir en finestra nova
Repositori
http://hdl.handle.net/2117/19353 Obrir en finestra nova
URL
http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=789468 Obrir en finestra nova
Resum
It is well known that microstrip patch antennas have a poor bandwidth due to the small spacing between the patch and the ground plane. A stacked patch configuration has been demonstrated experimentally as a feasible solution, but little information on the design procedure is available. Here, a systematic design procedure based on a single network model is shown.
Citació
Anguera, J.; Puente, C.; Borja, C. A procedure to design wide-band electromagnetically-coupled stacked microstrip antennas based on a simple network model. A: IEEE International Symposium on Antennas and Propagation. "1999 IEEE International Symposium on Antennas and Propagation, vol. 1: proceedings: 11-16 July 1999, Orlando, FL, USA". Orlando, Florida: Institute of Electrical and Electronics Engineers (IEEE), 1999, p. 944-947.
Paraules clau
Antenna radiation patterns, electromagnetic coupling, microstrip antennas

Participants

  • Anguera Pros, Jaume  (autor ponent)
  • Puente Baliarda, Carles  (autor ponent)
  • Borja Borau, Carmen  (autor ponent)