Loading...
Loading...

Go to the content (press return)

Validation of EMI model for matrix converters

Author
Espina, J.; Balcells, J.; Arias, A.; Ortega, C.; Gonzalez, D.; Gago, J.
Type of activity
Presentation of work at congresses
Name of edition
International Symposium on Electromagnetic Compatibility 2012
Date of publication
2012
Presentation's date
2012-09-18
Book of congress proceedings
EMC Europe 2012: International Symposium on Electromagnetic Compatibility: September 17-21,2012, Rome, Italy: proceedings
Publisher
IEEEXPLORE
DOI
https://doi.org/10.1109/EMCEurope.2012.6396844 Open in new window
Repository
http://hdl.handle.net/2117/17667 Open in new window
URL
http://ieeexplore.ieee.org Open in new window
Abstract
This paper is focused on the validation of a previously presented method to obtain conducted EMI in direct matrix converters (MC). Such model is based on a frequency domain equivalent circuit, which is applied to two different prototypes of MC in order to validate such method. This paper starts with a review of the EMI method and follows obtaining the equivalent circuit. The experimental part consists of a comparison between EMI simulation results and measured EMI in two different MC. Finally, t...
Citation
Espina, J. [et al.]. Validation of EMI model for matrix converters. A: International Symposium on Electromagnetic Compatibility. "Proc. EMC Europe 2012 International Symposium on Electromagnetic Compatibility, Rome, Italy, 2012". Roma: IEEEXPLORE, 2012.
Group of research
DISEN - Distributed Sensor Networks
Electromagnetic Compatibility (EMC); Widebandgap (WBG); Internal Activity; Feature Selective Validation (FSV); Spread Spectrum modulation; Reliability; Multilevel Converters; Fault detection;
PERC-UPC - Power Electronics Research Centre

Participants