Carregant...
Carregant...

Vés al contingut (premeu Retorn)

ZK60 alloy processed by ECAP: Microstructural, physical and mechanical characterization

Autor
Dimitru, F.; Higuera, O.; Cabrera, J.
Tipus d'activitat
Article en revista
Revista
Materials science and engineering A. Structural materials properties microstructure and processing
Data de publicació
2014-01-31
Volum
594
Número
31
Pàgina inicial
32
Pàgina final
39
DOI
https://doi.org/10.1016/j.msea.2013.11.050 Obrir en finestra nova
Repositori
http://hdl.handle.net/2117/22976 Obrir en finestra nova
URL
http://www.sciencedirect.com/science/article/pii/S0921509313012781# Obrir en finestra nova
Resum
Lately, magnesium alloys have been extensively investigated through severe plastic deformation (SPD) methods in order to extend their application to structural components. In the present work, as-extruded ZK60 magnesium alloy samples were subjected to 4 passes of equal-channel angular pressing (ECAP) at a processing temperature of 250 degrees C, following route Bc. The microstructural evolution of the deformed grains was analyzed using electron back-scattered diffraction (EBSD). The Orientation ...
Citació
Dimitru, F.; Higuera, O.; Cabrera, J. ZK60 alloy processed by ECAP: Microstructural, physical and mechanical characterization. "Materials science and engineering A. Structural materials properties microstructure and processing", 31 Gener 2014, vol. 594, núm. 31, p. 32-39.
Paraules clau
AZ31, BEHAVIOR, CALORIMETRY, CHANNEL ANGULAR EXTRUSION, DEFORMED MAGNESIUM ALLOY, DSC, Differential scanning calorimetry (DSC), EVOLUTION, Equal channel angular pressing (ECAP), Magnesium, Orientation Imaging Microscopy (OIM), RECRYSTALLIZATION, SEVERE PLASTIC-DEFORMATION, TEXTURE
Grup de recerca
PROCOMAME - Processos de Conformació de Materials Metàl·lics

Participants