Carregant...
Carregant...

Vés al contingut (premeu Retorn)

Residual stresses induced by honing processes on hardened steel cylinders

Autor
Buj, I.; Vivancos, J.; Setien, I.; San Sebastian, M.
Tipus d'activitat
Article en revista
Revista
International journal of advanced manufacturing technology
Data de publicació
2016-06-01
Volum
88
Número
5
Pàgina inicial
2321
Pàgina final
2329
DOI
https://doi.org/10.1007/s00170-016-8870-3 Obrir en finestra nova
Repositori
http://hdl.handle.net/2117/100210 Obrir en finestra nova
URL
http://link.springer.com/article/10.1007%2Fs00170-016-8870-3 Obrir en finestra nova
Resum
In the present paper, residual stresses induced by honing processes on hardened steel cylinders were determined. Cubic boron nitride (CBN) abrasives were employed. Both surface measurements and depth profiles were obtained by means of XRD. SEM observations were performed on samples’ surface. Roughness and material removal rate were also measured. Compressive residual stresses, which are known to increase fatigue life of components, were reported both in the axial and in the tangential directio...
Citació
Buj, I., Vivancos, J., Setien, I., San Sebastian, M. Residual stresses induced by honing processes on hardened steel cylinders. "International journal of advanced manufacturing technology", 1 Juny 2016.
Paraules clau
Abrasive stone, Cubic boron nitride, Honing, Residual stresses
Grup de recerca
TECNOFAB - Grup de Recerca en Tecnologies de Fabricació

Participants

  • Buj Corral, Irene  (autor)
  • Vivancos Calvet, Joan  (autor)
  • Setien Ugalde, Iñaki  (autor)
  • San Sebastian Ormazabal, Maria  (autor)