Carregant...
Carregant...

Vés al contingut (premeu Retorn)

Influence of the regime of electropulsing-assisted machining on the plastic deformation of the layer being cut

Autor
Hameed, S.; Gonzalez-Rojas, Hernan A.; Perat, J.; Napoles, A.; Sánchez, A.
Tipus d'activitat
Article en revista
Revista
Materials
Data de publicació
2018-05-25
Volum
11
Número
6
Pàgina inicial
886
DOI
https://doi.org/10.3390/ma11060886 Obrir en finestra nova
Repositori
http://hdl.handle.net/2117/117696 Obrir en finestra nova
https://www.terkko.helsinki.fi/article/18779231_materials-vol-11-pages-886-influence-of-the-regime-of-electropulsing-assisted-machining-on-the-plastic-deformation-of-the-layer-being-cut Obrir en finestra nova
URL
http://www.mdpi.com/1996-1944/11/6/886 Obrir en finestra nova
Resum
In this article, the influence of electropulsing on the machinability of steel S235 and aluminium 6060 has been studied during conventional and electropulsing-assisted turning processes. The machinability indices such as chip compression ratio ¿, shear plane angle f and specific cutting energy (SCE) are investigated by using different cutting parameters such as cutting speed, cutting feed and depth of cut during electrically-assisted turning process. The results and analysis of this work indica...
Citació
Hameed, S., Gonzalez-Rojas, Hernan A., Perat, J., Napoles, A., Sánchez, A. Influence of the regime of electropulsing-assisted machining on the plastic deformation of the layer being cut. "Materials", 25 Maig 2018, vol. 11, núm. 6.
Paraules clau
Chip compression ratio, Current density, Electropulsing, Machinability, Specific cutting energy
Grup de recerca
GAECE - Grup d'Accionaments Elèctrics amb Commutació Electrònica
TECNOFAB - Grup de Recerca en Tecnologies de Fabricació

Participants

Arxius