Loading...
Loading...

Go to the content (press return)

Effect of grain size and density of abrasive on surface roughness, material removal rate and acoustic emission signal in rough honing processes

Author
Buj-Corral, I.; Alvarez, J.A.; Dominguez, A.
Type of activity
Journal article
Journal
Metals
Date of publication
2019-08-01
Volume
9
Number
8
First page
1
Last page
15
DOI
10.3390/met9080860
Repository
http://hdl.handle.net/2117/168263 Open in new window
URL
https://www.mdpi.com/2075-4701/9/8/860 Open in new window
Abstract
Honing processes provide a special cross-hatch pattern to the internal surface of cylinders that favors oil flow. However, along honing operation the abrasive grains wear out and lose their ability to cut material. The honing chips mixed with oil fill the pores of the abrasives and they start cutting in an incorrect way, leading to clogging. In the present paper, honing experiments were carried out according to a 32 factorial design, with different grain size and density of abrasive grains. Roug...
Citation
Buj, I.; Alvarez, J.A.; Dominguez, A. Effect of grain size and density of abrasive on surface roughness, material removal rate and acoustic emission signal in rough honing processes. "Metals", 1 Agost 2019, vol. 9, núm. 8, p. 1-15.
Keywords
Acoustic emission, Chirplet, Clogging, Honing, Material removal rate, Roughness, Tool wear
Group of research
CREMIT - Center for Engines and Heat Installations
TECNOFAB - Manufacturing Technologies Research Group

Participants

Attachments