7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering
Date of publication
2019
Presentation's date
2019-06
Book of congress proceedings
COMPDYN 2019: Computational Methods in Structural Dynamics and Earthquake Engineering: proceedings of the 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering held in Crete, Greece 24-26 June 2019
First page
1797
Last page
1808
Publisher
Institute of Structural Analysis and Antiseismic Research School of Civil Engineering. National Technical University of Athens (NTUA)
The use of sensors to obtain the dynamic properties of structures by means of ambient vibrations has become a common practice. However, conventional and more extensively used methods require the installation of sensors, which should be in contact with the structure. These methods could be even risky in case of structures weakened by a hazardous event, for which the risk of collapse is unknown. In this study, two main subjects are analyzed and discussed. The former is related to the use of the Re...
The use of sensors to obtain the dynamic properties of structures by means of ambient vibrations has become a common practice. However, conventional and more extensively used methods require the installation of sensors, which should be in contact with the structure. These methods could be even risky in case of structures weakened by a hazardous event, for which the risk of collapse is unknown. In this study, two main subjects are analyzed and discussed. The former is related to the use of the Real-Aperture Radar (RAR) as a non-invasive, remote sensing interferometric method to measure the vibration response to ambient noise of buildings. As a test bed, two high-rise regular buildings with reinforced concrete frames (8-story) and steel frames (12-story), located in Barcelona, Spain, are analyzed. Notice that the RAR device is a sensor using the principle of interferometry to measure displacements. This type of sensors has exhibited a good performance in urban environments at different atmospheric, meteorological and lighting conditions, compared to other types of remote sensors (e.g. Laser Doppler). Another advantage is that RAR devices have a very good resolution and they can operate at great distances from the object to be measured. However, so far, RAR is rarely used in buildings, being still a poorly studied technique. The latter subject is related to the optimal post-processing of the acquired data. At this respect, the Power Spectral Density (PSD) signal-processing technique is used to process the signals acquired. From this analysis, the predominant periods of the analyzed buildings were obtained and then they were compared with those periods obtained from measurements of accelerometers located inside the structures. The results indicate that the use of RAR can be a reliable alternative to estimate the structural periods in a relatively simple and non-invasive manner.
Citation
Alva, R. [et al.]. Remote ambient vibration measurements with real aperture radar to estimate buildings dynamic properties. A: International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering. "COMPDYN 2019: Computational Methods in Structural Dynamics and Earthquake Engineering: proceedings of the 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering held in Crete, Greece 24-26 June 2019". Institute of Structural Analysis and Antiseismic Research School of Civil Engineering. National Technical University of Athens (NTUA), 2019, p. 1797-1808.
27063601.pdf
(2406617 bytes)
Share
