Loading...
Loading...

Go to the content (press return)

Analysis of printing parameters for metal additive manufactured parts through Direct Ink Writing process

Author
Bonada, J.; Xuriguera, E.; Calvo , L.; Poudelet, L.; Cardona, R.; Padilla, J.A.; Niubó, M.
Type of activity
Journal article
Journal
Procedia manufacturing
Date of publication
2020-03-09
Volume
41
First page
666
Last page
673
DOI
10.1016/j.promfg.2019.09.056
Repository
http://hdl.handle.net/2117/180173 Open in new window
URL
https://www.sciencedirect.com/science/article/pii/S2351978919311461 Open in new window
Abstract
Direct Ink Writing is an Additive Manufacturing process in which a metal ink is continuously extruded to built-up a green metal part. Therefore, a debinding and sintering process is required to obtain the final metal part. This thermal process produces a shrinkage of the green printed part according to several material and printing parameters. In this paper, the influence of printing process planning on the width of printed rods for a copper ink is analyzed by means of a Design of Experiments pr...
Citation
Bonada, J. [et al.]. Analysis of printing parameters for metal additive manufactured parts through Direct Ink Writing process. "Procedia manufacturing", 9 Març 2020, vol. 41, p. 666-673.
Keywords
Additive Manufacturing, Direct Ink Writing, Printing process planning
Group of research
REMM - Structures and Mechanics of Materials Research

Participants

  • Bonada Bo, Jordi  (author)
  • Xuriguera Martin, Elena  (author)
  • Calvo Duarte, Laura  (author)
  • Poudelet, Louison  (author)
  • Cardona, Roger  (author)
  • Padilla, Jose Antonio  (author)
  • Niubo Eslava, Maria  (author)

Attachments