Loading...
Loading...

Go to the content (press return)

Surface damaging of brass and steel pins when sliding over nitrided samples cut by finishing and roughing EDM conditions

Author
Martynenko, V.; Martinez Krahmer, D.; Napoles, A.; Cabo, A.; Pérez, D.; Zayas F, E.E.; Gonzalez-Rojas, Hernan A.; Sanchez Egea, Antonio J.
Type of activity
Journal article
Journal
Materials
Date of publication
2020-07-17
Volume
13
Number
14
First page
3199:1
Last page
3199:10
DOI
10.3390/ma13143199
Repository
http://hdl.handle.net/2117/327122 Open in new window
https://www.researchgate.net/publication/343018367_Surface_Damaging_of_Brass_and_Steel_Pins_when_Sliding_over_Nitrided_Samples_Cut_by_Finishing_and_Roughing_EDM_Conditions Open in new window
URL
https://www.mdpi.com/1996-1944/13/14/3199 Open in new window
Abstract
In the forging industry, surface quality and surface treatments of dies are crucial parameters to extend their life. These components are usually machined by milling or by Electrical Discharge Machining (EDM), and the final surface roughness depends on the machining techniques and operational conditions used in its fabrication. After milling, a nitriding treatment is widely applied to extend its service life. Nevertheless, no scientific report that informs about nitriding after EDM has been foun...
Citation
Martynenko, V. [et al.]. Surface damaging of brass and steel pins when sliding over nitrided samples cut by finishing and roughing EDM conditions. "Materials", 17 Juliol 2020, vol. 13, núm. 14, p. 3199:1-3199:10.
Keywords
EDM, Pin-on disc test, Plasma nitriding, Surface quality, Wear and friction
Group of research
CDEI-DM - Center for Industrial Equipment Design. Dynamics of Machines
GAECE - Electronically Commutated Motor Drives Group
LAM - Multimedia Applications and ICTs Laboratory
SARTI - Technological Development Center for Remote Acquisition and Data Processing System
TECNOFAB - Manufacturing Technologies Research Group

Participants

Attachments