Loading...
Loading...

Go to the content (press return)

Common mode EMI model for a direct matrix converter

Author
Espina, J.; Balcells, J.; Arias, A.; Ortega García, Carlos
Type of activity
Journal article
Journal
IEEE transactions on industrial electronics
Date of publication
2011-11
Volume
58
Number
11
First page
5049
Last page
5056
DOI
https://doi.org/10.1109/TIE.2011.2158774 Open in new window
Repository
http://hdl.handle.net/2117/13562 Open in new window
URL
http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=5783924 Open in new window
Abstract
This paper presents an electromagnetic interference (EMI) model to evaluate the conducted common mode (CM) disturbances produced by matrix converters (MCs). The model is based on obtaining a high frequency (HF) equivalent circuit with HF sources representing the switching devices. The circuit resolution in the frequency domain allows the calculation of any EMI parameter with very low computational burden and avoids convergence problems, which are common in time domain methods. The original contr...
Citation
Espina, J. [et al.]. Common mode EMI model for a direct matrix converter. "IEEE transactions on industrial electronics", Novembre 2011, vol. 58, núm. 11, p. 5049-5056.
Group of research
Electromagnetic Compatibility (EMC); Widebandgap (WBG); Internal Activity; Feature Selective Validation (FSV); Spread Spectrum modulation; Reliability; Multilevel Converters; Fault detection;
PERC-UPC - Power Electronics Research Centre

Participants